|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ECAR
Fact Sheet for Hawaii
Regulations BACK to VIRTUAL TOUR The following fact sheet was prepared by the ECAR Center staff. Once prepared, each ECAR Center fact sheet undergoes a review process with the applicable state environmental agency(ies). You can check on the status of the review process here. Please read the disclaimer on the status page. While we have tried to present a summary of the essential information on this topic, you should be aware that other items, such as local regulations, may apply to you. What You Need to Know Because batteries contain lead and sulfuric acid, lead-acid battery disposal is fully regulated as a hazardous waste management activity. When intact lead-acid batteries are recycled, the handling requirements are relaxed, but the batteries are still subject to limited hazardous waste regulations. This fact sheet will tell you:
The Hawaii Department of Health (DOH), Environmental Management Division, Office of Solid Waste Management, has prepared a guidance document to help auto recyclers manage lead-acid batteries. Much of the information is included in the fact sheet below. You can access the guidance for lead-acid batteries under "Other Relevant Resources." Automotive recyclers who generate, collect, transport, store, or regenerate lead-acid batteries for reclamation purposes may be exempt from certain hazardous waste management requirements. The basic rule of thumb is that the batteries must be either reclaimed either through regeneration or another means. If the batteries are not reclaimed, you must follow the hazardous waste regulations. If you turn in used vehicle batteries for recycling, you do not need to obtain a solid waste permit, nor report your actions to the DOH. However, if batteries or electrolytes are disposed of improperly, the dumpers are subject to penalties and liabilities allowable under state solid waste and/or hazardous waste regulations. Battery Storage. Indoor storage is preferable to outdoor storage to avoid contact with water and to avoid extreme temperatures that can cause cracking. Rain, snow, and draining water should not enter the storage area.
Improper storage practices can result in potential violations to the Federal Clean Water Act, as well as violations of state and local water quality laws. Stacking and Packaging Batteries. Package lead-acid batteries in accordance with federal DOT regulations and/or get assistance from a battery specialist who is shipping spent batteries out of state for recycling.
Disposal. You shall not dispose of lead-acid batteries in landfills, discard on public and private properties, grounds, or waters, or in household rubbish. Lead-acid batteries must be delivered to battery retailers/wholesalers, or to collection or recycling facilities permitted by the DOH. Response to Releases. Should your batteries leak onto the ground, you must immediately contain all releases and determine whether any material resulting from the release is hazardous waste. If so, you must manage the hazardous waste in compliance with all applicable laws. Here are some tips to prevent releases:
Links to the Regulations. Use the following links to view the regulations pertaining to battery management. Hawaii's Hazardous Waste Management Requirements (unofficial online version) Hawaii's Solid Waste Management Requirements (unofficial online version) Federal EPA Standards Applicable to Generators of Hazardous Waste All battery handlers are required to manage the batteries and other solid waste generated from battery activities according to specific parameters and procedures. If so, ensure that batteries are stored on a non-reactive, impermeable and curbed surface. Coat asphalt or concrete storage surfaces with an acid-resistant epoxy, fiberglass or plastic coating. To avoid releases of lead contaminated acid, make sure that there are no floor drains which lead outdoors or which connect to sewer systems, storm drains, or septic tanks. Keep a log of your weekly inspections when you check for leaks or cracks. Keep cracked or leaking batteries in closed containers that are acid-resistant and leak proof, away from non-leaking batteries. Contain and neutralize all spills. Ensure outdoor battery storage is designed so no weather elements can get in. Best Management Practices (BMPs) Most regulations tell you what you have to do to be in compliance, but they don't explain how to do it. That's where "best management practices" come into play. BMPs are proven methods that help you to get into compliance and stay there. The following BMPs are recommended for battery storage areas and management procedures.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
About | What's New | News | ECar Fact Sheets | Compliance | Pollution Prevention | Resource Files | Ask ECar | Calendar ©2010 ECAR "The Driving Force for Environmental Compliance" |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||