|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ECAR
Fact Sheet for Georgia Regulations BACK to VIRTUAL TOUR The following fact sheet was prepared by the ECAR Center staff. Once prepared, each ECAR Center fact sheet undergoes a review process with the applicable state environmental agency(ies). You can check on the status of the review process here. Please read the disclaimer on the status page. While we have tried to present a summary of the essential information on this topic, you should be aware that other items, such as local regulations, may apply to you. What You Need to Know Wastewater is often generated by operations such as the rinsing of parts, and the washing down of engines or dirty tools. If water becomes mixed with oil, antifreeze, solvents, or other liquids, it is important that it be properly treated and contained prior to discharge. If your wastewater is currently just going down an unregulated drain, you've got a problem. Even if your activities have gone unnoticed for years, there is an increasing chance that you will be inspected. The federal EPA and the states are starting to look much more carefully at sources of water pollution that have so far remained unidentified, and they have (rightly or wrongly) decided that auto recyclers are a significant problem area. You will almost certainly need separate permits both for stormwater runoff (see the ECAR Stormwater fact sheet) and for any industrial wastewater that you generate. This page will give you an overview of how to handle your industrial wastewater. Georgia’s regulations on wastewater generally reflect those established under federal law. Sanitary wastewater (wastewater generated from lavatories and washroom sinks) can be discharged to a city sewer system, however, most local governments require businesses to obtain a discharge permit. Sanitary wastewater cannot be discharged to a stream, pond, or wetland without having a special permit. If you have questions regarding sanitary wastewater, contact your local sewer authority or the Georgia Environmental Protection Division (EPD) Water Quality Branch. Industrial wastewater is regulated differently than sanitary wastewater. If you combine sanitary and industrial wastewater, then the mixed wastewater is regulated like industrial wastewater. All industrial wastewater discharges are regulated by federal and state regulations and in most cases, also by local regulations. Industrial Wastewater. If a facility generates industrial wastewater, there may be requirements it must meet in order to ensure that the wastewater is properly managed. There are two situations in which a facility might be required to obtain a permit for wastewater generated by the facility, depending upon how the wastewater is ultimately disposed. These two situations are discharges to waters of Georgia and discharges to a publicly owned treatment works (POTW). Discharges to waters of Georgia. If your facility discharges industrial wastewater via a “point source” (such as a pipe, etc.) directly to waters of Georgia, you will be required to obtain a National Pollutant Discharge Elimination System (NPDES) permit. Waters of Georgia include (but are not limited to) ground water, storm drains, rivers, streams, lakes and ditches. NPDES permits can be either general or individual permits. A general permit is a “one size fits all” type of permit and is issued for specific types of discharges such as storm water runoff, non-contact cooling water or stone quarry discharges. An individual permit is site-specific and unique to a facility. Stormwater permits are considered NPDES general permits. Permits contain limits on the quantity, discharge rate and concentrations of pollutants in the water that are discharged from a point source into waters of the state. There are permit fees associated with these permits. The amount of the fee is dependent upon the type of permit issued. Discharges to a POTW. If your facility discharges industrial wastewater into a municipal sewer connected to a POTW, you may need to obtain a pretreatment permit. To meet the standards of your local sewer authority, you may need to install treatment equipment such as an oil/water separator to prevent oil and sludge from being discharged to the sewer. This is referred to as "pretreatment.” In some cases, the skimmed oil can be managed with your used oil. See the ECAR Used Oil Fact Sheet. However, sludge collected by pretreatment equipment will have to be periodically removed and disposed of, possibly as a hazardous waste (you must make a hazardous waste determination). In most instances, wastewater will require some form of pretreatment prior to discharge into the sewer system. *Georgia requires a pretreatment discharge permit for all facilities discharging into POTWs that do not have an approved pretreatment program. If your facility disposes of its wastewater in a manner other than sending it to a POTW, it will need to determine whether it is a hazardous waste. If your wastewater is a hazardous waste, you will need to ensure that the tank storing this wastewater meets the requirements contained in the hazardous waste rules. In addition, you must ensure that it properly manages its wastewater upon removing it from the tank. See the ECAR Hazardous Waste Fact Sheet for more information. Pretreatment. Links to the Regulations and Forms. Use the following links to view the regulations and permit forms pertaining to wastewater. Georgia Water Quality Rules – See Chapter 391-3-6 Georgia NPDES Permit Notice of Intent Federal Safe Drinking Water Act Requirements When an inspector comes to your facility, there are certain things he or she checks to see if you are in compliance with environmental regulations. It makes good sense for you to perform a "self-audit" and catch and correct problems before they result in penalties. Also, there are some compliance incentives associated with self-audits (see Audit Policy Page). Use the following list to audit your wastewater management activities.
Best Management Practices (BMPs) Most regulations tell you what you have to do to be in compliance, but they don’t explain how to do it. That’s where "best management practices" come into play. BMPs are proven methods that help you to get into compliance and stay there. The following BMPs are recommended for wastewater management.
Related ECAR Fact Sheets None. BACK to VIRTUAL TOUR |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
